Do it yourself
| ||||
|
Kia Soul - Video tutorial
Model: Kia Soul
MK 2
- Years 2013-2018 To remove the front bumper of the Kia Soul, start by lifting the front part and placing it on stands. Using a plastic lever, release the pressure pins located under the bumper, just behind the rubber lip. Unscrew the plastic screw inside the two wheel arches and release the side parts of the bumper. Unscrew the six bolts that secure the plate above the radiator with a socket wrench, then release the four pressure pins with a plastic lever and unscrew the two screws on the frame with a screwdriver. Release two clips under the plate we unlocked. Open the power outlet door, inside which we will find, protected by a plastic cover, a bolt that we will unscrew with a socket wrench. Remove the license plate and, after removing the fog light electrical connectors and the central strap, the bumper can be removed.
Posted on 14 April 2024 by ScegliAuto
Replacement of the rear bumper on Kia Soul
Kia Soul (2008-2014 / MK 1) Is the bumper of our Kia Soul damaged? Let's see how it disassembles from the rear of the kia Soul. We open and lift the tailgate of the luggage comp
How to replace the headlight on a Kia Soul
Kia Soul (2013-2018 / MK 2) Before starting, we will have to open the front hood of our Kia Soul. So let's start by unscrewing and removing the bolts that secure the headlight t
How to replace the front headlight bulb of the Kia Soul 2.
Kia Soul (2013-2018 / MK 2) If the headlight bulb of your Kia Soul Mk2 is not working properly and you want to replace it, you just need to follow the steps described in the fol Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |