Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Rc8 : How to change engine oil in KTM RC8?

Model: Ktm Rc8
Part: Engine oil
How to change engine oil in KTM RC8?

As we can see in this tutorial, changing the engine oil in the KTM RC8 is an extremely simple and fast operation. First of all, let's wait for the engine to be cold enough, then place a container underneath it and disassemble the lower fairing using both a 3mm and a 4mm hex key. We then unscrew the two bolts of the bleed holes with a 13mm socket wrench, open the filter housing and let all the oil contained in the system escape. At this point we can insert the replacement filter, reassemble everything and introduce the new oil through the appropriate hole.


Posted on 8 June 2023 by ScegliAuto



How to change engine oil in KTM RC8?
Rc8 As we can see in this tutorial, changing the engine oil in the KTM RC8 is an extremely simple and fast operation. First of all, let's wait for the en
How to change the engine oil on a KTM 125
Ktm 125 Today in this short video we are going to see how to change the engine oil on our ktm 125, first we take a basin that we are going to use to collect
How to change the engine oil on the Ktm SX 50
Sx 50 Let's find out all the steps to carry out the routine maintenance service of the engine oil change on the Ktm SX 50cc motorcycle, in simple and quick

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos