Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Quannon : Changing the engine oil and oil filter on Kymco Quannon

Model: Kymco Quannon
Part: Engine oil
Changing the engine oil and oil filter on Kymco Quannon

Run the engine for a few minutes to warm the oil present and make it more fluid. Immediately unscrew the bolt that acts as a plug to the filling hole, on the right side of the bike, in order to allow the passage of air in the circuit. Unscrew the screws securing the underneath protection to the engine compartment and remove it. Unscrew the oil drain bolt and collect it in a tray. While collecting the oil, unscrew the oil filter and replace it (lubricate the o-r of the new filter before inserting it). Measure how much oil has flowed out of the compartment and close the drain bolt, then refill with new lubricant.


Posted on 8 February 2024 by ScegliAuto



Changing the engine oil and oil filter on Kymco Quannon
Quannon Run the engine for a few minutes to warm the oil present and make it more fluid. Immediately unscrew the bolt that acts as a plug to the filling hole
How to replace the engine oil and oil filter of the Kymco Downtown 125.
Downtown 125 In a simple and concise manner, we will explain how to perform routine maintenance on the Kymco Downtown 125 scooter by changing the engine oil and o
Changing the oil on Kymko X-town 300i
X Town To change the engine oil of the Kymco X-town 300i, first of all get a suitable container in which to drain the used oil. Oil which you will then disp

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos