Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Gran Dink 250 : How do you replace the front brake pads on the Kymco Gran Dink 250?

Model: Kymco Gran Dink 250
Part: Brake pads
How do you replace the front brake pads on the Kymco Gran Dink 250?

In order to replace the front brake pads of the Kymco Gran Dink 250, you need to loosen the screws that secure the front brake caliper of the motorcycle, so that it can be detached from the corresponding disc. Once the caliper has been detached, you will need to remove the existing brake pads from inside it and insert the new replacement pads into the respective housing. After the new pads have been inserted, you can reposition the caliper on the corresponding disc and secure it with the appropriate bolts. After installation, you will need to verify that the front brake is functioning correctly.


Posted on 7 July 2023 by ScegliAuto



How do you replace the front brake pads on the Kymco Gran Dink 250?
Gran Dink 250 In order to replace the front brake pads of the Kymco Gran Dink 250, you need to loosen the screws that secure the front brake caliper of the motorcy
How to replace the front brake pads of the Kymco Super Dink 300?
Super Dink 300 In order to replace the front brake pads of the Kymco Super Dink 300 it is necessary to loosen the bolts that fix the brake caliper to the special di
How do you remove the rear wheel of the Kymco Gran Dink 125?
Gran Dink 125 To be able to remove the rear wheel of the Kymco Grand Dink 125 you need to unscrew the nut that fixes the corresponding pin, located on the right re

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos