Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Easy 100 : How do you replace the belt of the Kymco Easy 100?

Model: Kymco Easy 100
Part:
How do you replace the belt of the Kymco Easy 100?

In order to replace the belt of the Kymco Easy 100, you need to loosen the screws that fix the cover of the crankcase located on the left side of the motorcycle, near the rear wheel. Once the cover has been removed, you will be able to locate the underlying belt. This belt must be released from the clutch and the variator that surround it, so it will be necessary to remove both the clutch and the variator. At this point, you can insert the new belt by fixing both pieces and then covering everything with the corresponding crankcase.


Posted on 9 November 2023 by ScegliAuto



How do you replace the belt of the Kymco Easy 100?
Easy 100 In order to replace the belt of the Kymco Easy 100, you need to loosen the screws that fix the cover of the crankcase located on the left side of the
How do I replace the belt on the Kymco Like 150i?
Like 150i In order to replace the belt of the Kymco Like 150i you have to loosen the screws that fix the casing at the rear wheel, on the left side of the bike
Guide to replacing the drive belt of the Kymco Agility 50
Agility 50 In this guide, we will see the main instructions that will allow us to disassemble and replace the transmission belt of the Kymco Agility 50 scooter.

How to change the light bulb on a Peugeot Kisbee

In this video we can see how to change the front light bulb of the Peugeot Kisbee scooter: first of all, we need to remove the front shield, unscrewing the six torx screws on the edges of the shield that will allow us to remove it easily. In the center we will find the cap where the bulb is inserted; we will have to unscrew the rubber cap slightly and remove it, after removing the electrical connector. Here we replace the bulb with one of those provided and then put the bulb holder back in place (always remember not to touch the bulb of the new bulb with bare hands). put the cap back in place, put the electrical connector back in place and also the six screws that hold the shield in place. Job done.

Watch the video!


by ScegliAuto

More videos