Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Alto 800
  6. : Where is the fuse box of Maruti Alto 800 located?

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Fuse box
Operation: Where is the fuse box of Maruti Alto 800 located?

If you own a Maruti Alto 800 and do not know where the fuse box is located, do not worry because in the following guide you will find all the necessary instructions to find it without any difficulty. First of all, you need to park the car on a flat road, then lift the front hood and locate the fuse box on the top of the engine compartment. At this point, remove the fuse box cover with your hands to access the fuses. Before working on them to fix any electrical faults, you must disconnect the battery.


Posted on 1 April 2024 by ScegliAuto



Where are the fuses located in the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) Each fuse of the Maruti Alto 800 is located inside one of the special fuse boxes that are installed on the vehicle: in this type of car, two can be i
Fuse box diagram and location of fuses in the Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) Soon we will see the instructions that will allow us to discover the fuse scheme and diagram of the Maruti Alto 800, in simple and quick steps. First
Placement of fuse boxes on the Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) In the Maruti Alto 800, there are two fuse boxes: the first one is located under the dashboard, on the driver's side. Among the most common fuses her

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos