Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : Scheme and positioning of internal fuses of the Maruti Alto 800

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Fuse box
Operation: Scheme and positioning of internal fuses of the Maruti Alto 800

Today we will see the layout and positioning of the internal fuses of the Maruti and Suzuki Alto 800, in simple and quick steps. First of all, we get into the car, on the driver's side, and start removing the plastic cover under the steering wheel; we find the internal fuse box on the back, as shown in the video. At this point, we find the fuse layout and diagram on the cover; in the vehicle's owner's manual, it will be possible to find the codes and amperages associated with each fuse, useful for any replacement.


Posted on 8 May 2024 by ScegliAuto



How to synchronize the engine of the Suzuki Alto 800 - Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show us the main steps necessary to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, we open the vehicle's engin
Fuse box diagram and location of fuses in the Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) Soon we will see the instructions that will allow us to discover the fuse scheme and diagram of the Maruti Alto 800, in simple and quick steps. First
Where are the fuses located in the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) Each fuse of the Maruti Alto 800 is located inside one of the special fuse boxes that are installed on the vehicle: in this type of car, two can be i

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos