Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : How do you reset the Sony car radio of the Maruti Alto 800?

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Car stereo
Operation: How do you reset the Sony car radio of the Maruti Alto 800?

In order to reset the Sony car radio of the Maruti Alto 800, you need to turn on the ignition by turning the ignition key inside the appropriate block: once this has been turned on, you must hold down both buttons located in the two lower corners of the car radio. By holding down these buttons, you will notice that the car radio will turn off for a few seconds: by continuing to hold them down, you will notice that the radio will turn back on. At this point, you will see that all settings will be restored.


Posted on 23 April 2024 by ScegliAuto



How to synchronize the engine of the Suzuki Alto 800 - Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show us the main steps necessary to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, we open the vehicle's engin
Where are the fuses located in the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) Each fuse of the Maruti Alto 800 is located inside one of the special fuse boxes that are installed on the vehicle: in this type of car, two can be i
Where is the fuse box of Maruti Alto 800 located?
Maruti Alto 800 (2012-2023 / AOD) If you own a Maruti Alto 800 and do not know where the fuse box is located, do not worry because in the following guide you will find all the necessa

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos