Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Remove the grille on Mercedes C

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Mask
Operation: Remove the grille on Mercedes C

Do we want to remove the grille of a Mercedes C-class? Let's see how it is disassembled, open the front hood and begin disassembly. We remove the plastic screws placed between the frame cover and the bumper. Once the upper cover of the grill has been removed, unscrew the tightening screws of the same. We remove the grille from above the front bumper. We mount the new grille in the car bumper by pressing on it until it locks into the bumper. We screw in the clamping screws, then we tighten the plastic screws with the cover over the front bezel.


Posted on 13 January 2024 by ScegliAuto



How to disassemble the front bumper grille of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Below we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Mercedes C-Class. First, we open the
How to replace the front bumper grille of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Today's guide will show us how to disassemble and replace the front bumper grille of the Mercedes C-Class, following the instructions below. First, w
How to remove the front grille on a Mercedes C-Class W204 version.
Mercedes Classe C (2007-2013 / W204) In this video, we see how to disassemble the front grille of a Mercedes C-Class W204 version. First, we need to remove the air vent, and then remove

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos