Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : How to remove the door handle of the Mercedes Vito

Mercedes Vito - Video tutorial

Model: Mercedes Vito W638, MK 1 - Years 1995-2003
Part: Door
Operation: How to remove the door handle of the Mercedes Vito

Removing the door handle of the Mercedes Vito W368 is a very simple task that can be done independently by following one of our video tutorials. We begin by removing the plastic cover of the handle, using a plastic tool to pry it off. Once the cover is removed, we take out the central Torx screw and then the window switch panel. Again, we use the plastic tool to pry it off. After removing the switch panel, we unscrew the central screw and disengage the door handle. The process for reassembling the handle is the same as the disassembly.


Posted on 6 May 2023 by ScegliAuto



How do you replace the exterior sliding door handle on the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) In order to replace the external handle of the Mercedes Vito sliding door, you need to open the aforementioned door, detaching the circular cover loc
How to remove the driver's door handle of the Mercedes Benz Vito V250 W447
Mercedes Vito (2014-2024 / MK 3, W447) The guide shows how to remove the external door handle of the driver's door of the Mercedes Benz Vito V250 w447. The first operation to be carried ou
External handle replacement on Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Removing the external handle on a Mercedes Vito door consists of a very quick and, moreover, very simple operation. After opening the door of interes

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos