Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : How to disassemble the cigarette lighter of the Mercedes S-Class.

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S W222, MK 6 - Years 2013-2020
Part: Cigarette Lighter
Operation: How to disassemble the cigarette lighter of the Mercedes S-Class.

Below we will see the instructions that will allow us to disassemble and replace the cigarette lighter of the Mercedes S-Class. First of all, we get into the car and start by opening the compartment where our cigarette lighter socket is located; then we use a torx key to unscrew the two screws that we find on the sides, in order to remove it, as shown in the video. At this point, we disconnect the electrical connector of the cigarette lighter, in order to remove it; then we proceed to adapt a new system (for example, USB sockets), following the video tutorial until the end!


Posted on 23 September 2023 by ScegliAuto



Where are the fuse boxes of the Mercedes S-Class located
Mercedes Classe S (1999-2005 / MK 4, W220) The fuse box of the Mercedes S-Class is located in the cheek of the dashboard, in contact with the passenger door. Another is located under the right
Where are the fuses of the Mercedes S-Class located?
Mercedes Classe S (1999-2005 / MK 4, W220) Inside the Mercedes S-Class, the fuses are located in the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle there are
Where are the fuses located in the Mercedes S-Class?
Mercedes Classe S (1999-2005 / MK 4, W220) On the Mercedes S-Class, all fuses are contained within the appropriate fuse boxes that are installed on the vehicle: there are four of them on this

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos