Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Where are the fuses of the Mercedes S-Class located?

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Fuse box
Operation: Where are the fuses of the Mercedes S-Class located?

Inside the Mercedes S-Class, the fuses are located in the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle there are four. The first two are located in the engine compartment, at the top under the windshield: these contain the fuses that handle the operation of the low beam headlights, the fuel pump, the starter motor, etc. The second box is located under the rear seat on the passenger side and contains the fuses for the courtesy lights, the cigarette lighter, etc. The last box is located in the trunk, under the carpet at the base: it contains the fuses for the parking sensors, the rear lights, etc.


Posted on 19 May 2024 by ScegliAuto



Where are the fuses located in the Mercedes S-Class?
Mercedes Classe S (1999-2005 / MK 4, W220) All the fuses of the Mercedes S-Class are contained inside boxes that are installed on the vehicle: the first one is located on the edge on the left
Where are the fuses located in the Mercedes S-Class?
Mercedes Classe S (2005-2013 / MK 5, W221) The fuses of the Mercedes S-Class are contained within the appropriate fuse boxes that are present in the vehicle: in this car model, it is possible
Where are the fuses located in the Mercedes S-Class?
Mercedes Classe S (2013-2020 / W222, MK 6) On the Mercedes S-Class, the fuses are divided into specific fuse boxes that are installed in the vehicle: in this type of car, it is possible to ide

Other guides that may interest you

    Frequently Asked Questions

    • Classe S 2005-2013 - Where is the fuel pump relay on the Mercedes S-Class W221 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos