Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to dismantle the dashboard of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Mass air flow sensor
Operation: How to dismantle the dashboard of the Mercedes C-Class

In this video tutorial, we will see the main steps that will allow us to disassemble and replace the dashboard of the Mercedes C-Class, following the instructions below. First of all, we get into the car and start by removing and taking off the wooden cover that we find on the central part of the dashboard; then we also remove the air vents, as shown in the video. At this point, we remove the glove compartment and then the instrument panel, thus removing the entire dashboard and potentially replacing it with a new one, applying the reverse procedure!


Posted on 21 November 2023 by ScegliAuto



How to replace the blind of the storage compartment of the Mercedes C-Class W203.
Mercedes Classe C (2014-2021 / W205) .. blind of the storage compartment on the Mercedes Class C W203. To begin, remove the dashboard around the gear shift located between the two seats as seen..
How to dismantle the rear door panel in the Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. removing the rear door panel in the Mercedes C-Class is an extremely simple and quick operation. First, we open the door in question, then we unscrew..
Guide to replacing the injectors of the Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) .. and replace the injectors of the Mercedes C-Class. First, we open the engine hood and remove the plastic cover of the engine; then, we disconnect..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos