Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : How to disassemble the central tunnel of the Mercedes M-Class

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Central tunnel
Operation: How to disassemble the central tunnel of the Mercedes M-Class

Below we will see the steps useful for disassembling and replacing the central tunnel of the Mercedes M-Class. First of all, we get on board the passenger compartment and start disassembling and removing the armrest along with the storage compartment; then we remove the cover of our central tunnel, levering on the sides, as shown in the video. At this point we disconnect the electrical connectors found underneath and remove the cover of the gear lever and its knob; we unscrew the additional screws of the tunnel to lift and remove it from the passenger compartment, applying the reverse process for reassembly!


Posted on 18 March 2024 by ScegliAuto



Disassembly of the tunnel on Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. see how to disassemble the tunnel on Mercedes M-Class.We remove by levering the lining placed in the lower part of the central tunnel, we remove the..
Where are the relays located in the Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) .. where the relays are located in the Mercedes M-Class, to be consulted in case a device is malfunctioning and we want to check the respective relay...
Armrest disassembly instructions
Mercedes Classe M (1997-2005 / W163) To be able to disassemble the central tunnel, start by releasing the frame at the base of the gear lever, unscrew the two screws on the bottom of the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos