Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to replace the windshield wipers on the Mercedes B-Class?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Windscreen wipers
Operation: How to replace the windshield wipers on the Mercedes B-Class?

In this tutorial we can see how to replace the windshield wipers in the Mercedes Classe B, an extremely simple and quick operation. First of all, make sure that all the windshield wipers are in the resting position, if not, activate them and stop them as soon as this position is reached, then lift the rear windshield wiper, grab the blade, unlock the fastening clip and separate it from the arm by pulling it outwards. Then place the replacement, press firmly and hook it onto the support. To replace the front windshield wipers, just follow the same procedure.


Posted on 27 April 2024 by ScegliAuto



How to top up the wiper water in Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. see how to top up the wiper water on Mercedes B-Class. Pull the plastic lever located at the bottom left of the dashboard, lift the front hood and put..
Mercedes B-Class W245 cabin air filter replacement
Mercedes Classe B (2005-2011 / MK 1, W245) .. air filter or pollen filter on a Mercedes Benz B-Class W245. First of all we open the bonnet of our car and we go to remove the cover of the air filter,..
How do you remove the Mercedes B-Class windshield?
Mercedes Classe B (2011-2019 / MK 2, W246) .. to remove the windshield from the Mercedes B-Class you need to disassemble all the components that cover its perimeter: you start by detaching the..

    Frequently Asked Questions

    • Classe B 2011-2019 - Where is the Mercedes B-Class windscreen washer reservoir located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos