Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to disassemble the steering wheel in the Mini Cooper?

Mini - Video tutorial

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Steering wheel
Operation: How to disassemble the steering wheel in the Mini Cooper?

As we can see in this tutorial, removing the steering wheel on a Mini Cooper is an extremely simple and fast operation. Before doing this, we disconnect the negative pole of the battery so as to operate in complete safety. Let's start by identifying the hole located on the lower part of the steering column, then insert a screwdriver inside, release the clip and release the airbag. We then disconnect the connector, unscrew the central bolt with a 16mm socket wrench and separate the steering wheel from the column. To fit any spare part, simply follow the reverse procedure.


Posted on 29 December 2022 by ScegliAuto



How to remove the steering wheel airbag of a Mini Cooper
Mini (2001-2007 / R50, R53, R52) Before we are able to start, we will have to disconnect the battery of our Mini Cooper, so as to work safely. We start by sitting in the driver's sea
How to remove the Mini Cooper steering wheel
Mini (2007-2014 / R55, R57, R56) Remove the steering wheel of the Mini Cooper? Let's remove the steering wheel together with the airbag and replace it. Before disassembling the steer
Mini Cooper R53 steering wheel replacement
Mini (2001-2007 / R50, R53, R52) In this video we see how to disassemble and replace the steering wheel of the Mini Cooper R53, in simple and quick steps. First of all we get on boar

Other guides that may interest you

    Frequently Asked Questions

    • Mini 2010-2016 - What does the yellow padlocked steering wheel light on the Mini R60 mean? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos