Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R50, R53, R52
- Years 2001-2007 In this video, we see how to change the steering wheel of a Mini Cooper R53 with a three-spoke one. To remove it, we will need a screwdriver. We turn on the ignition and look for the two screws located under the steering wheel, which will allow us to remove the airbag. We turn off the ignition and now we can disconnect the battery or remove the airbag. Our YouTuber chooses this option and pulls up the tabs behind the device to remove it completely. Now we see the 17mm screw that secures the steering wheel to the steering column, and he unlocks it with a screwdriver. If we look closely, we see a mark that we need to align: we straighten the wheels and remove the steering wheel. We install the new one - which has the same line and we will align it - we pull all the cables inside and reassemble our 17mm screw on the steering column. We connect all the connectors and mount his airbag. We test the functionality of the steering wheel controls; if everything works, the job is done.
Posted on 5 January 2024 by ScegliAuto
How to remove the steering wheel airbag of a Mini Cooper
Mini (2001-2007 / R50, R53, R52) Before we are able to start, we will have to disconnect the battery of our Mini Cooper, so as to work safely. We start by sitting in the driver's sea
How to replace the steering wheel of a Mini Cooper
Mini (2007-2014 / R55, R57, R56) Before we can start, we will have to disconnect the battery, so as to work in total safety, and then we will have to go and sit in the driver's seat
Removing the Mini Cooper S airbag
Mini (2001-2007 / R50, R53, R52) Do we want to remove the airbag or the steering wheel of the Mini Cooper? Let's see how the airbag is released from above the car's steering wheel. W Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |