Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Suspensions

Nissan Qashqai - Suspensions

Nissan Qashqai (2014-2022 / J11)
How to get rid of front suspension squeak
If we too have heard an annoying squeak when we pass over bumps and dips with our Nissan Qashqai, then this video is for us: we have to remove the wheel and …read all…
Posted on 3 June 2023 by ScegliAuto
Airbags (15) Alternator (1) Loudspeaker (4) Shock absorbers (6) Antenna (6) Car stereo (21) Roof Rack Bars (9) Battery (12) Coil (1) Air Vents (2) Arm (1) Spark plugs (7) Glow plugs (6) Bodywork (7) Glove box (2) Key (25) Timing belt (25) Air conditioning (1) -board computer (30) Checks and maintenance (130) Dashboard (4) Bearing (1) Brake discs (4) Headlight (6) Tail light (10) Fog lights (8) Particulate filter (2) Air filter (18) Cabin air filter (35) Diesel filter (15) Oil filter (6) Hand brake (3) Clutch (1) Grille (1) Injectors (2) Accessory Kit (1) Light bulb (10) Headlight bulb (19) Rear light bulb (7) Interior lights ceiling light bulb (7) Dashboard light (1) License plate light (4) Third brake light (1) Handle (10) Mask (1) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (5) Door panel (14) Front bumper (4) Rear bumper (2) Brake pads (13) Hydraulic pistons (1) Tires (6) Gear Shift Knob (6) Fuel pump (1) Door (2) Push button (1) Window lift button (1) Instrument cluster (28) Radiator (1) Wheel (5) Fuse box (34) Seat (2) Parking sensors (1) Lambda sensor (1) Suspensions (1) Outside rearview mirror (13) Interior rearview mirror (1) Windscreen wipers (4) Thermostat (1) Central tunnel (2) Turbine (2) EGR valve (4) Interior blower (7) Side window (1) Steering wheel (5)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos