Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Replacement exterior handle on Nissan Micra K11

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Handle
Operation: Replacement exterior handle on Nissan Micra K11

To disassemble the external handle of a door, you must first remove the panel by unscrewing all the bolts that secure it to the underside, to the side and to the central area (where the handle is located). Obviously also remove the window lifter knob, then pry into the slot all around the door panel with a flat screwdriver or plastic wedge, detaching it a little at a time from its seat until it is completely removed. Once the panel has been removed, we can proceed to the handle: with a socket wrench, unscrew the screws located inside the door, then behind the handle, and remove it by pulling it from the outside.


Posted on 12 January 2024 by ScegliAuto



How to remove the exterior handle of the Nissan Micra
Nissan Micra (1992-2002 / K11) Remove the external door handle? Let's see the disassembly of the door handle of a Nissan Micra. We unscrew the screws on the cladding panel with a s
Nissan Micra K11 instrument cluster bulb replacement
Nissan Micra (1992-2002 / K11) In this video tutorial we will see how to remove and replace the instrument cluster bulbs of a Nissan Micra K11. First we get inside the car and we g
How to replace the fuel filter on Nissan Micra K11
Nissan Micra (1992-2002 / K11) In today's video tutorial we will see how to remove and replace the fuel filter on Nissan Micra K11, first series, in simple and quick steps. First o

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos