Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to disassemble the steering wheel in the Nissan Micra?

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Steering wheel
Operation: How to disassemble the steering wheel in the Nissan Micra?

In this tutorial, we can see how to remove the steering wheel in the Nissan Micra, a very simple and quick operation. First of all, we open the hood, then we locate the negative terminal of the battery and disconnect it, in order to work in complete safety. Next, we go inside the cabin, unscrew the two screws located in the rear area of the steering wheel, separate the airbag, and disconnect the corresponding power connector. Then, we unscrew the large central bolt, separate the steering wheel from the steering column, and follow the reverse procedure to install the replacement if necessary.


Posted on 14 January 2024 by ScegliAuto



Disassembly of the steering wheel of the Nissan Micra.
Nissan Micra (2002-2010 / K12) In this video tutorial, we will see how to disassemble and replace the steering wheel and its airbag of the Nissan Micra, following these simple step
How do you replace the steering wheel on your Nissan Micra?
Nissan Micra (2002-2010 / K12) In order to replace the steering wheel of the Nissan Micra, it is necessary to unscrew the two screws located in the rear part of the steering wheel
How do you replace the steering wheel of the Nissan Micra?
Nissan Micra (2002-2010 / K12) In order to replace the steering wheel of the Nissan Micra, you need to loosen the screws located on the lower rear part of the steering wheel and re

    Frequently Asked Questions

    • Micra 2010-2017 - What does the P / S light on the Nissan Micra mean? Read Answer
    • Micra 2002-2010 - Meaning spy P / S Nissa Micra 2004? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos