Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : Guide to disassembling the clutch of the Nissan Juke Nismo 1.6 DIG-T

Nissan Juke - Video tutorial

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Clutch
Operation: Guide to disassembling the clutch of the Nissan Juke Nismo 1.6 DIG-T

In this guide we will see the main instructions that will allow us to disassemble and replace the clutch kit of the Nissan Juke Nismo 1.6 DIG-T. First of all, lift the car and start dismantling and removing the front right wheel and the fender; then remove the half-axle and disconnect the arm, as shown in the video. At this point, unscrew the clutch cover screws to access the clutch, proceeding with the disassembly; if necessary, also replace the flywheel along with the clutch, checking the wear of the transmission, following the video tutorial until the end!


Posted on 18 May 2024 by ScegliAuto



Guide to disassembling the Nissan Juke cabin fan.
Nissan Juke (2010-2019 / MK 1) Briefly, we will see the main steps that will help us in the process of disassembling and replacing the cabin fan of the Nissan Juke. First, we get o
How to replace the clutch of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the clutch on a car engine is a rather complex operation, let's try to report the most important operations to be carried out in this descr
Guide to using the Nissan Juke radio and multimedia system
Nissan Juke (2019-2024 / MK 2) In this short and simple guide we will see how to use the Nissan Juke car radio and multimedia system, following the instructions below. First of all

Other guides that may interest you

    Frequently Asked Questions

    • Juke 2010-2019 - How much does it cost to replace the clutch in the Nissan Juke? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos