Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How do you replace the drive shaft boot on the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Drive shaft boot
Operation: How do you replace the drive shaft boot on the Opel Corsa?

To be able to replace the drive shaft boot on the Opel Corsa, you need to lift the car with a jack or a bridge, so that the corresponding wheel is not in contact with the floor. Then it will be necessary to loosen the bolts that fix the wheel to its housing, removing it completely and accessing the components in the lower part. Here you will have to unscrew the bolts that fix the wheel hub, which can then be lowered, allowing the drive shaft cap to be removed from its housing. Then a new one can be inserted, reassembling all the removed parts.


Posted on 23 December 2022 by ScegliAuto



How to remove the gear knob and gear shift boot of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) Let's see the steps that will allow us to disassemble and replace the gear knob and gear shift boot of the Opel Corsa, following the instructions bel
How to adjust the handbrake of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before we can start, we will have to go and sit in the driver's seat of our Opel Corsa. So let's start by disengaging the handbrake lever boot, simpl
How to change the clutch of the Opel Corsa C diesel
Vauxhall Corsa (2000-2006 / Corsa C) Replacing the clutch (the kit for this model includes, in addition to the disc and the disc pusher, a hydraulic release bearing) is not an easy DIY m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos