Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Geopolis 250 : Peugeot Geopolis 250, saddle opening with collapsed battery

Model: Peugeot Geopolis 250
Part:
Peugeot Geopolis 250, saddle opening with collapsed battery

If the battery of your Peugeot Geopolis 250 has collapsed, in addition to the fact that the scooter will not start, you will not even be able to open the saddle, since the French company has not inserted a manual opening or even the 12V socket. We therefore teach you a trick to solve this annoying problem. Remove the front shield by unscrewing the three relative screws, thus releasing the ignition lock. Strip a red cable with a small knife and make the bridge with a battery using a negative pole of your choice. This will give power to the ignition and at least be able to open the saddle.


Posted on 2 January 2024 by ScegliAuto



Peugeot Geopolis 250, saddle opening with collapsed battery
Geopolis 250 If the battery of your Peugeot Geopolis 250 has collapsed, in addition to the fact that the scooter will not start, you will not even be able to open
How to replace the battery of the Piaggio BV 250?
Bv 250 The Piaggio BV 250 battery is located in the compartment under the saddle. In order to reach it, it will therefore be necessary to lift the saddle pa
How to remove the saddle of a Kawasaki Ninja 250
Ninja 250 Before starting, it is advisable to go and position our Kawasaki Ninja 250 vertically, so as to work more comfortably on the saddle. Let's start by o

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos