Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : How to change the engine oil and gearbox oil of the Peugeot Kisbee

Model: Peugeot Kisbee
Part: Engine oil
How to change the engine oil and gearbox oil of the Peugeot Kisbee

Let's see in this short and simple guide how to disassemble and replace the engine oil and transmission oil of the Peugeot Kisbee scooter. First we put the central stand to our scooter and start by unscrewing the oil vent bolt that we find under the engine, using a socket wrench; let the oil drain in a container for about ten minutes. At this point we are going to unscrew the filling hole and pour in the new engine oil, filling up to level; then replace the gearbox oil, unscrewing the bolt that we find at the bottom left and then top up!


Posted on 21 September 2022 by ScegliAuto



How to change gearbox oil on Peugeot Kisbee 4T 2020
Kisbee Let's find out in this guide how to replace the transmission oil of the Peugeot Kisbee 50 4-stroke, from 2020. First we put our scooter on the centra
How to change the Peugeot Kisbee 50 engine oil
Kisbee Let's find out below the necessary steps on how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Peu
How to change the engine oil on Peugeot Kisbee 50cc 4T (2020)
Kisbee Let's see how to carry out the routine maintenance service of the engine oil change on a Peugeot Kisbee 50cc 4-stroke scooter, from 2020. First we pl

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos