Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : Disassembly and replacement of the front brake pads of the Peugeot Kisbee.

Model: Peugeot Kisbee
Part: Brake pads
Disassembly and replacement of the front brake pads of the Peugeot Kisbee.

Today we will see the instructions that will allow us to disassemble and replace the front brake pads of the Peugeot Kisbee scooter. First of all, we put the scooter on the center stand and start unscrewing the fixing screws of the front brake caliper, removing it from the disc; then we press on the caliper piston to make it retract, as shown in the video. At this point, we remove and replace the old brake pads with the new ones, of the correct type or with the original ones; we clean the caliper from the residual dirt and reassemble the braking system.


Posted on 8 March 2024 by ScegliAuto



Replacement of the front brake pads of the Peugeot Kisbee
Kisbee Today's guide will show us how to disassemble and replace the front brake pads of the Peugeot Kisbee scooter, following these simple steps. First, we
Replacing the front brake pads on the Peugeot Kisbee 50
Kisbee Let's see in this video how to remove and replace the front brake pads on the Peugeot Kisbee 50cc scooter, in simple and quick steps. First of all, l
How to remove the variator casing of a Peugeot Kisbee
Kisbee Before starting, we will have to get off our Peugeot Kisbee, then place it on its central stand, and if possible, lift it. The variator casing is fix

How to replace the battery of the remote control of the Honda SH Mode scooter?

As we can see in this tutorial, replacing the Honda SH Mode scooter remote control battery is an extremely simple and fast operation. To do this, we will need a small Phillips screwdriver and a spare CR1220 battery. First of all, unscrew the screw located in the lower area, right next to the metal key, then separate the two halves of the remote control and extract the central module. Once this is done, we open the latter by levering with the key itself, remove the old battery and insert the spare one. Finally, we reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos