Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : Replacement of the front brake pads of the Peugeot Kisbee

Model: Peugeot Kisbee
Part: Brake pads
Replacement of the front brake pads of the Peugeot Kisbee

Today's guide will show us how to disassemble and replace the front brake pads of the Peugeot Kisbee scooter, following these simple steps. First, we put the scooter on the center stand and start unscrewing the fastening screws of the front brake caliper, using a socket wrench with extension; then we remove the brake caliper from the disc, applying pressure on the caliper piston to make it retract, as shown in the video. At this point, we remove and replace the brake pads with new ones, as well as with the original ones; then we reassemble the brake caliper!


Posted on 10 March 2024 by ScegliAuto



Disassembly and replacement of the front brake pads of the Peugeot Kisbee.
Kisbee Today we will see the instructions that will allow us to disassemble and replace the front brake pads of the Peugeot Kisbee scooter. First of all, we
Replacing the front brake pads on the Peugeot Kisbee 50
Kisbee Let's see in this video how to remove and replace the front brake pads on the Peugeot Kisbee 50cc scooter, in simple and quick steps. First of all, l
How to remove the variator casing of a Peugeot Kisbee
Kisbee Before starting, we will have to get off our Peugeot Kisbee, then place it on its central stand, and if possible, lift it. The variator casing is fix

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos