Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Replace the external temperature sensor of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Coolant temperature sensor
Operation: Replace the external temperature sensor of the Peugeot 206

How to remove the temperature sensor of a Peugeot 206? Let's see the disassembly of the sensor from inside the engine compartment. We lift the front hood of the car, we secure the same. We disassemble the soundproofing panel of the engine and identify where the sensor is placed. We disconnect the power supply terminal from above the temperature sensor, unscrew the nut and remove the same. We screw the new sensor and connect the electrical clamp. We mount the engine cover panel once we are done. We test the correct functioning of the sensor once the car engine is started.


Posted on 28 February 2024 by ScegliAuto



Remove the temperature sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Are we having problems with the temperature sensor? Let's see how to remove the temperature sensor on a Peugeot 206. We raise the front hood of the e
How do i replace the water temperature sensor on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the water temperature sensor on the Peugeot 206, you need to open the hood, so that you have access to the components inside the
How do you replace the coolant temperature sensor on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The operation to replace the water temperature sensor on the Peugeot 206 is carried out by opening the bonnet, so that you have access to the compone

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos