Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the temperature sensor on the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Engine
Operation: How to replace the temperature sensor on the Peugeot 206

If we have to intervene on the car to replace the engine temperature probe, we can proceed as follows and also with the help of the images in the video tutorial. Open the bonnet and lift the car from under the engine compartment, unhook the water outlet duct from the radiator to empty the cooling system. Go back to the engine compartment and locate the position of the probe on the right of the cylinder head, first disconnect the power supply connector and then use a socket wrench to unscrew the probe. Then obtain a new sensor, put it back on its seat and reconnect the power supply terminal. Finally we have to refill the cooling system with coolant.


Posted on 10 April 2023 by ScegliAuto



Remove the temperature sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Are we having problems with the temperature sensor? Let's see how to remove the temperature sensor on a Peugeot 206. We raise the front hood of the e
Replace the external temperature sensor of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the temperature sensor of a Peugeot 206? Let's see the disassembly of the sensor from inside the engine compartment. We lift the front
How do i replace the water temperature sensor on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the water temperature sensor on the Peugeot 206, you need to open the hood, so that you have access to the components inside the

    Frequently Asked Questions

    • 206 1998-2012 - What problems does the head gasket on the Peugeot 206 petrol engine cause? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos