Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Removing the airbag and horn button Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Push button
Operation: Removing the airbag and horn button Peugeot 206

In today's video we will see how to remove the driver's airbag and, consequently, the horn button of a Peugeot 206, following these simple instructions. First of all we go inside the car and we go to unscrew the torx screw that we find on the back of the steering wheel (on the plastic cap); once removed we extract our airbag together with the horn button, disconnecting the two electrical connectors present. At this point we can access the wiring and the button, where we will replace any non-working component; for reassembly, just apply the reverse disassembly procedure!


Posted on 26 March 2024 by ScegliAuto

This video is currently unavailable


Remove the steering wheel airbag of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this very short video tutorial we can see how to remove the steering wheel airbag of a Peugeot 206, before starting this operation it is very impo
Remove the horn on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Do you want to remove the horn on Peugeot 206? Let's see together how to proceed with disassembly in the illustrative video. Open the bonnet by pulli
Where is the horn in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this video we can see where the horn is located in the Peugeot 206 and how to proceed if we need to replace it. As shown, it is located just behin

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos