Do it yourself
| ||||
|
Peugeot 208 - Video tutorial
Model: Peugeot 208
MK 1, A9
- Years 2012-2019 If the AdBlue light has turned on in our Peugeot 208, it means that the pollution liquid has reached a too low level and therefore needs to be topped up. This is a very simple and quick operation, let's see how to proceed in this tutorial. First of all, let's get a 10-liter urea canister, then turn off the engine, open the trunk door, and remove both the bottom panel and the spare wheel. Next, locate the central cap, unscrew it, and insert the canister tube into the hole. At this point, let's pour the necessary amount of liquid to reach the maximum level.
Posted on 7 December 2023 by ScegliAuto
How to top up AdBlue on Peugeot 208 - Citroen C3 1.6 BlueHdi
Peugeot 208 (2012-2019 / MK 1, A9) In today's video we will see how to top up the AdBlue liquid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, but also on
How do i replace the Peugeot 208 AdBlue pump?
Peugeot 208 (2019-2024 / UP, UJ, UB, MK 2, UW) In order to replace the Peugeot 208 AdBlue pump, you need to lift the car via a bridge, so that you can access the components in the lower part of th
Where is the AdBlue tank located in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) The AdBlue liquid is an essential element for the correct functioning of the anti-pollution system of cars. The liquid is subject to wear, which mean Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |