Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How do you replace the head gasket of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Engine head
Operation: How do you replace the head gasket of the Peugeot 206?

The procedure for replacing the cylinder head gasket on the Peugeot 206 is carried out by loosening the screws that fix the coils and spark plugs on the top of the engine block; then you can proceed by loosening the screws that fix the injectors, also removing these along with the camshafts and valve cover. This will give access to the cylinder head gasket, which can now be detached from its housing in order to insert the new replacement piece; after the new gasket has been inserted, it will be possible to reposition all the removed parts to check the engine's operation.


Posted on 17 March 2024 by ScegliAuto



How to remove the cylinder head of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) In this video tutorial we will see how to disassemble the cylinder head and its gasket of the Peugeot 206 with 1.4 petrol engine. First we open the e
How to replace the Peugeot 206 cylinder head gasket?
Peugeot 206 (1998-2012 / MK 1) In order to replace the Peugeot 206 cylinder head gasket, the hood must be opened to gain access to the engine compartment. Here you will need to rem
How to replace the Peugeot 206 gasket
Peugeot 206 (1998-2012 / MK 1) So after you have released the hood from the special lever and hold it through the special rod, you can start removing all the pipes and cables passi

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - How much does the head gasket cost for the Peugeot 206? Read Answer
    • 206 1998-2012 - How much does it cost to replace the head gasket on the Peugeot 206? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos