Do it yourself
| ||||
|
Peugeot 206 - Video tutorial
Model: Peugeot 206
MK 1
- Years 1998-2012 In this video we see how to replace the clutch cable of the Peugeot 206: it is not an easy job, because beforehand we have to remove the air filter and the battery from the engine compartment. Then from inside the cabin, we have to go under the clutch pedal and look for the sheath, which is the piece of plastic shown by the youtuber in the video and which contains the clevis (the white piece that can be seen) and is the one to which we will attach the new cable, which we must take from the inside of the engine. The cable has a kind of hook on the top, with which it will not be very difficult to hook it from the corresponding hole. At that point it will be sufficient to reconnect it to the clutch and put back all the components we removed.
Posted on 22 April 2024 by ScegliAuto
How to remove the clutch cable on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's see in this video how to remove the clutch cable on a Peugeot 206. Lift the bonnet and put it in safety; we remove the battery from the vehicle
How to disassemble and replace the clutch cable of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Peugeot 206, in simple steps. First, op
How to replace the clutch cable on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To be able to replace the clutch cable of the Peugeot 206 you have to remove the plastic panel that is located in correspondence with the pedals, imm Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |