Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Cosa 2 : How to disassemble the starter motor on a Piaggio Cosa 2

Model: Piaggio Cosa 2
Part: Starter motor
How to disassemble the starter motor on a Piaggio Cosa 2

To disassemble the starter on our Piaggio Cosa 2, we loosen the nut under which there is the eyelet with the power cable, with an 8mm spanner, unscrew it and remove it. At that point we can remove the scooter; just remove the two 10 mm pins. We give a splash of oil to help the threads, which in fact unscrew with relative ease. It is an easily accessible component, therefore a simple operation. The two pins are very long, and usually quite dirty. At this point the moped is free. You'll have to wiggle it a bit to get it to come off, but it will come easily enough. Lift it up and you will have disassembled it.


Posted on 19 December 2022 by ScegliAuto



How to disassemble the starter motor on a Piaggio Cosa 2
Cosa 2 To disassemble the starter on our Piaggio Cosa 2, we loosen the nut under which there is the eyelet with the power cable, with an 8mm spanner, unscre
Disassembly of the Piaggio NRG 50 starter motor
(Various brands) Nrg Let's see in this short and simple guide how to disassemble and replace the starter motor of the Piaggio NRG 50 2-stroke scooter. First of all we go
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Vespa Et4 Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos