Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Skr 125 : How do you replace the air filter of the Piaggio SKR 125?

Model: Piaggio Skr 125
Part: Air filter
How do you replace the air filter of the Piaggio SKR 125?

In order to replace the air filter of the Piaggio SKR 125, you need to loosen the bolts that secure the filter box located on the left side of the motorcycle, near the rear wheel. Once the cover has been removed, you will be able to access the underlying filter and it will need to be removed from its housing. After removing it, you will need to insert the new replacement part, closing the filter box and securing the cover with the bolts. After installation, you will need to start the engine to verify that everything is functioning correctly.


Posted on 17 July 2023 by ScegliAuto

This video is currently unavailable


How do you replace the air filter of the Piaggio SKR 125?
Skr 125 In order to replace the air filter of the Piaggio SKR 125, you need to loosen the bolts that secure the filter box located on the left side of the mo
How do you replace the air filter on the Piaggio Beverly 125?
Beverly 125 The replacement of the air filter on the Piaggio Beverly 125 is done by loosening the screws that secure the protective panel of the air filter box:
How to replace the Piaggio Liberty 125 - 50 air filter
Liberty 125 Below we will see the steps that will allow us to disassemble and replace the air filter cartridge of the Piaggio Liberty 125 scooter, but also of th

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos