Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Beverly 300 Hpe : Replacement of the Piaggio Beverly 300 HPE remote control battery.

Model: Piaggio Beverly 300 Hpe
Part: Battery
Replacement of the Piaggio Beverly 300 HPE remote control battery.

Today we are going to discover the process that will allow us to disassemble and replace the battery of the electronic key remote control for the Piaggio Beverly 300 HPE scooter. First, we take the remote control in our hand and start levering on the side of the remote control to remove the plastic casing, thus gaining access to the electronic board and the battery. We remove the old battery and replace it with a new one of the correct type and with the same code. At this point, we insert the battery in the correct direction and reassemble the remote control, following the reverse process!


Posted on 15 October 2023 by ScegliAuto

This video is currently unavailable


Replacement of the Piaggio Beverly 300 HPE remote control battery.
Beverly 300 Hpe Today we are going to discover the process that will allow us to disassemble and replace the battery of the electronic key remote control for the Pia
How to reset the cutting light on Piaggio Beverly 300/400 HPE?
(Various brands) Various Performing the reset of the cutting or service light on Piaggio Beverly 300/400 HPE models is a very simple operation. Start by placing the scooter,
How do you replace the battery of the Piaggio Beverly 400 remote control?
Beverly 400 The battery replacement for the Piaggio Beverly 400 remote control is done by removing the chrome trim located on the top of the device: once this tr

How to replace the battery of the remote control of the Honda SH Mode scooter?

As we can see in this tutorial, replacing the Honda SH Mode scooter remote control battery is an extremely simple and fast operation. To do this, we will need a small Phillips screwdriver and a spare CR1220 battery. First of all, unscrew the screw located in the lower area, right next to the metal key, then separate the two halves of the remote control and extract the central module. Once this is done, we open the latter by levering with the key itself, remove the old battery and insert the spare one. Finally, we reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos