Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Polestar
    3. :
  3. Polestar 2
    4. : How to disassemble and replace the wheel of the Polestar 2

Polestar Polestar 2 - Video tutorial

Model: Polestar Polestar 2 MK 1 - Years 2022-2024
Part: Wheel
Operation: How to disassemble and replace the wheel of the Polestar 2

Replacing the wheel on the Polestar 2 requires a very simple process, identical to all cars; we therefore retrieve the wheel replacement kit that we find in the trunk of the car. At this point, we loosen the wheel bolts with the appropriate key, then lift the car with the hydraulic jack, as shown in the video; we then remove the wheel (whether it is front or rear). Now we replace the wheel with the new one, replacing the tire if necessary; finally, we tighten the bolts in a crisscross pattern, then place the entire replacement kit in the designated compartment.


Posted on 19 February 2024 by ScegliAuto



How do you charge the Polestar 2 at home?
Polestar Polestar 2 (2022-2024 / MK 1) The sector of cars with 100% electric engines has now taken over, and Volvo Polestar is an example of this. In this video, the Volvo Polestar 2 is sh
Resetting the service light on the Polestar 2.
Polestar Polestar 2 (2022-2024 / MK 1) In this video, we see how to reset, after performing all the maintenance operations, the Service light in a Polestar 2. Sit in the driver's seat with
Very peculiar features of the Polestar 2.
Polestar Polestar 2 (2022-2024 / MK 1) Polestar is a Swedish automotive brand, acquired by Volvo in 2015. Volvo, in turn, had been acquired by the Chinese brand Geely in 2010. Polestar is

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos