Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Where is the coolant temperature sensor located in the Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic MK 1, RX4, Scenic 1 - Years 1993-2003
Part: Coolant temperature sensor
Operation: Where is the coolant temperature sensor located in the Renault Scenic?

In this video, we can see where the coolant temperature sensor is located in the Renault Scenic, and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the sensor in question is located on the left side of the engine, to our right when facing the vehicle from the front. To access it, we will need to remove both the air filter box and the respective collectors. Once this is done, it will be possible to disconnect the power connector, unscrew the sensor using a wrench, and install the replacement.


Posted on 18 January 2024 by ScegliAuto



Where is the OBD port located on the Renault Scenic 2012?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you own a 2012 Renault Scenic and are wondering where the OBD port is located, all you need to do is carefully read the following instructions and
How to remove the mirror of a Renault Scenic
Renault Scenic (1996-2003 / ) Let's see how the exterior mirror of a Renault Scenic is removed. With a lever with plastic coating, we go to pry between the perimeter of the mirror
Where is the OBD port located in the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you want to quickly locate the OBD port of your Renault Scenic Mk3, all you have to do is carefully follow the instructions described in this new

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos