Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the front wheel bearing in a Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Bearing
Operation: How to replace the front wheel bearing in a Renault Clio?

In this tutorial we can see how to replace the front wheel bearing in the Renault Clio, a simple operation but one that requires good manual skills. First of all, we lift the side where we will be working, then we remove the wheel, disconnect the various brake system pipes and remove both the caliper and the brake disc. We then unscrew all the hub fixing bolts, separate it from the suspension and, using a press or equivalent tool, extract the bearing from the hub itself. At this point we can insert the replacement, obviously applying the appropriate grease, and reassemble everything.


Posted on 16 April 2024 by ScegliAuto



How to change rear wheel bearing on Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To carry out this operation the car must be raised on the lift. We begin to remove the wheel by unscrewing its fastening bolts. Once this is done, we
How to remove the front disc bearing on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to remove the front disc bearing on Renault Clio? First of all, we position our car on a column bridge (jack), loosen the pins with a telescopic
How to remove the wheel bearing on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to intervene on the disassembly of a wheel bearing with all the attached parts on Renault Clio. We place our car on a column bridge, loosen the p

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos