Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : How do you replace the EGR valve of the Renault Trafic?

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: EGR valve
Operation: How do you replace the EGR valve of the Renault Trafic?

In order to replace the EGR valve of the Renault Trafic, you need to open the hood to access the components located inside the engine compartment: here you will be able to locate the air filter box, which must be removed from its housing. Once the box has been removed, you will be able to locate the EGR valve underneath which can be freed from its screws and the corresponding connector attached to it; at this point it will be possible to remove the old valve and insert the new one. The new valve must now be secured with screws and reconnected to the connector.


Posted on 7 May 2024 by ScegliAuto



How to remove the EGR valve of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before we can start, we will have to go to open the front hood of our Renault Trafic, and then remove the upper engine cover. Let's start by disconne
Where is the MAP sensor located on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) The MAP sensor (Manifold Absolute Pressure = absolute pressure sensor) is used for the recovery gases of the exhaust gases that re-enter the intake d
How to clean the intake manifold of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) It is evident that over time the intake ducts tend to become clogged due to the leakage of oil vapors and unburned fuel; clogging and consequent encr

Other guides that may interest you

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the EGR valve located on the Renault Trafic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos