Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : How to remove the LPG injectors from the Saab 9-5.

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Injectors
Operation: How to remove the LPG injectors from the Saab 9-5.

Let's see in this guide the main steps that will allow us to disassemble and replace the LPG injectors of the Saab 9-5. First of all, we open the engine hood of our car and start by disconnecting the LPG pipe located on the injector rail; we disconnect the electrical connectors of the individual injectors and unscrew the fixing screws of the rail to remove it along with the injectors, as shown in the video. At this point, we remove and replace any dirty or faulty injectors, installing the new ones; we apply the reverse procedure for reassembly!


Posted on 9 July 2023 by ScegliAuto



How to replace the crankshaft position sensor in the Saab 9-5?
Saab 9 5 (2010-2012 / Ys3g, MK 2) In this tutorial, we can see how to replace the crankshaft position sensor in the Saab 9-5, a very simple and quick operation. First of all, make sur
How to replace the gear knob of the Saab 9-5.
Saab 9 5 (1997-2010 / MK 1, Ys3e) If the gear knob in your Saab 9-5 first generation (year 1997-2010) is too worn out and you want to replace it yourself, then all you have to do is p
How do you replace the starter motor on the Saab Nove Cinque?
Saab 9 5 (1997-2010 / MK 1, Ys3e) To be able to replace the starter motor of the Saab 9 5 you have to go to open the hood and access the components below, as the starter motor is loca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos