Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Tivoli
    4. : How to disassemble the central tunnel of the Ssangyong Tivoli - KG Mobility Tivoli

SsangYong Tivoli - Video tutorial

Model: SsangYong Tivoli MK 1 - Years 2015-2023
Part: Central tunnel
Operation: How to disassemble the central tunnel of the Ssangyong Tivoli - KG Mobility Tivoli

In this guide, we will disassemble the central tunnel of the Ssangyong Tivoli, as well as the KG Mobility Tivoli, in simple steps. First, we get on board the cabin and start by removing the gear knob; then we pry the plastic side cover to detach the gear console, disconnecting the electrical connectors found underneath, as shown in the video. At this point, we remove the armrest and the glove compartment, unscrewing the fixing screws; we then remove the entire central tunnel, applying the reverse process for reassembly!


Posted on 12 April 2024 by ScegliAuto



How to disassemble the rear light of the Ssangyong Tivoli - KG Mobility Tivoli.
SsangYong Tivoli (2015-2023 / MK 1) .. its bulbs on the Ssangyong Tivoli, as well as the KG Mobility Tivoli. First, let's move to the back of the car and open the trunk door. Then, unscrew..
Ssangyong Tivoli fuse schema and positioning
SsangYong Tivoli (2015-2023 / MK 1) The following information will show us the positioning and the fuse layout of the Ssangyong Tivoli, following the instructions provided below. First,
Where are the fuses of the Ssangyong Tivoli located?
SsangYong Tivoli (2015-2023 / MK 1) The fuses of the Ssangyong Tivoli are divided into the two fuse boxes that are installed on the vehicle: in this type of vehicle, it will be possible

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos