Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. : B9 Tribeca : How to replace tailgate headlight bulbs in Subaru Tribeca?

Subaru B9 Tribeca - Video tutorial

Model: Subaru B9 Tribeca MK 1 - Years 2006-2014
Part: Rear light bulb
Operation: How to replace tailgate headlight bulbs in Subaru Tribeca?

In this tutorial we can see how to replace the headlight bulbs on the tailgate of your Subaru Tribeca, an extremely simple and fast operation. First of all, let's get the special tool for removing the clips, alternatively a screwdriver with a flat tip, then open the tailgate and disengage the interior light panel, levering in the slot indicated. Next, unscrew the 4 headlight fixing nuts with an 8mm socket wrench, grab the latter and extract it from the tailgate. At this point we can proceed with the replacement of the faulty bulb.


Posted on 3 May 2023 by ScegliAuto



How to replace tailgate headlight bulbs in Subaru Tribeca?
Subaru B9 Tribeca (2006-2014 / MK 1) In this tutorial we can see how to replace the headlight bulbs on the tailgate of your Subaru Tribeca, an extremely simple and fast operation. First
Removal of Subaru Impreza headlight bulbs
Subaru Impreza (2011-2016 / MK 4) Do we want to replace the headlight bulbs or the headlight itself? Let's see how everything is disassembled on Subaru Impreza. We raise the front hoo
Change headlight bulbs on Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) Let's see how to replace burnt out headlight bulbs on Subaru Impreza. We open the front hood, pulling the lever located at the bottom right of the da

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos