Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. : Levorg : How to replace the battery in the Subaru Levorg remote control?

Subaru Levorg - Video tutorial

Model: Subaru Levorg VM - Years 2014-2020
Part: Key
Operation: How to replace the battery in the Subaru Levorg remote control?

Replacing the battery of the Subaru Levorg remote control, as we can see in this tutorial, is an extremely simple and inexpensive operation. To do this, we will need a small flat-tip screwdriver and a replacement battery of type CR2032 3V. Let's start by extracting the emergency key by pressing the appropriate rear button, then insert the screwdriver into the indicated slot, lever and separate the door. Once this is done, we can remove the old battery and insert the replacement one, being careful to position it in the right direction.


Posted on 8 July 2023 by ScegliAuto



How to replace the battery in the Subaru Levorg remote control?
Subaru Levorg (2014-2020 / VM) Replacing the battery of the Subaru Levorg remote control, as we can see in this tutorial, is an extremely simple and inexpensive operation. To do th
How to replace the battery of a 2020 Subaru key.
Subaru Xv (2012-2017 / MK 1) The battery replacement for the key/remote of a Subaru vehicle is the same for all vehicles of the same manufacturer. Today, specifically, we will se
How to replace the remote control battery of Subaru XV Crosstrek?
Subaru Xv (2012-2017 / MK 1) Replacing the remote control battery of the Subaru XV Crosstrek is a very simple and fast operation, let's see how to proceed in this tutorial. To do

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos