Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Tt600 R : How to start a Suzuki TT600 R

Model: Suzuki Tt600 R
Part: Checks and maintenance
How to start a Suzuki TT600 R

Before starting, we will have to place our Suzuki TT600 R on the stand. So let's start by inserting the key in the starter pawl, and then turn it fully clockwise. After that, we will have to open the ignition lever located near the left side of the engine block. At this point, we will have to push the ignition lever repeatedly with our foot, until the engine starts. When the engine is running, we will be able to close the ignition lever, and we will have correctly finished the procedure to start the engine of our Suzuki TT600 R.


Posted on 25 February 2024 by ScegliAuto



How to start a Suzuki TT600 R
Tt600 R Before starting, we will have to place our Suzuki TT600 R on the stand. So let's start by inserting the key in the starter pawl, and then turn it ful
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following
How to change the engine oil of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before we can start, we will have to go and lift the front of our Suzuki Swift, thus reaching the oil spill nut. So let's start by unscrewing and rem

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos