Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Dr 350 : How to replace the engine oil in the Suzuki DR 350?

Model: Suzuki Dr 350
Part: Engine oil
How to replace the engine oil in the Suzuki DR 350?

In this tutorial, we can see how to replace the engine oil in the Suzuki DR 350, a very simple and quick operation. First of all, we wait for the engine to be sufficiently cold, then we remove the protective frame located in the lower area of ??the engine. We then position a container under the motorcycle, disconnect the indicated tube, and let all the oil in the system drain out. Next, we open the filter housing by unscrewing the three bolts with an 8mm wrench, remove the old filter, and insert the replacement. At this point, we can reassemble everything and pour the new oil through the designated hole.


Posted on 5 July 2023 by ScegliAuto



How to replace the engine oil in the Suzuki DR 350?
Dr 350 .. In this tutorial, we can see how to replace the engine oil in the Suzuki DR 350, a very simple and quick operation. First of all,..
How to change the engine oil and oil filter on Yamaha XT 350 (1991)
Xt 350 In this video tutorial we will see how to replace the engine oil and the oil filter, performing it regularly at each maintenance interval, on a Yamah
How to change the Beta RR 350 engine oil and oil filter
Rr 350 In this guide we illustrate how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Beta RR 350 enduro

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos