Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Dr 600 : How to start the engine of the Suzuki DR 600

Model: Suzuki Dr 600
How to start the engine of the Suzuki DR 600

In this short and simple guide, we will see how to start the engine of the Suzuki DR 600 enduro motorcycle, following the instructions below. First of all, put the motorcycle on the stand and put the engine in neutral; then open the kickstart lever and give it a strong kick as shown in the video. If the engine is cold, it may be necessary to give a few extra kicks, pulling air from the carburetors to help with ignition; once the engine is started, we can close the air again, remembering to close the kickstart lever.


Posted on 2 April 2024 by ScegliAuto



How to start a Suzuki GSXR 600
Gsxr 600 Before being able to begin, we will have to sit on the saddle of our Suzuki GSXR 600. Let's start by inserting the key inside the ignition switch, an
How to start the engine of the Suzuki DR 600
Dr 600 .. In this short and simple guide, we will see how to start the engine of the Suzuki DR 600 enduro motorcycle, following the instructions below. First..
How to replace the battery of Suzuki GSX-R 600
Gsxr 600 Replacing the battery of the Suzuki GSX-R 600, but also of the GSX-R 750, is an operation that takes a few minutes and a simple socket wrench. First,

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos