Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : How do you replace the spark plugs of the Suzuki Swift?

Suzuki Swift - Video tutorial

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Spark plugs
Operation: How do you replace the spark plugs of the Suzuki Swift?

In order to replace the spark plugs of the Suzuki Swift, you need to open the hood so that you can access the components located in the upper part of the engine compartment: here you will need to remove the plastic cover of the top of the engine block, in order to locate the coils underneath. These will need to be removed from their housing, so that the spark plugs below can be removed using the appropriate socket wrench; after removal, you can reinsert the coils and cover everything with the corresponding panel.


Posted on 18 February 2024 by ScegliAuto



How do you replace spark plugs on Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) In order to replace the spark plugs of the Suzuki Swift it will be possible to open the hood, so that the screws that fix the plastic cover in the up
How do you replace spark plugs on Suzuki Swift?
Suzuki Swift (1994-2004 / MK 3) The replacement of the spark plugs of the Suzuki Swift is carried out by opening the hood, in order to have access to the components inside the engin
How to replace the engine spark plugs on a Suzuki Swift 1.3 MK3
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this video tutorial we will see how to remove and replace the engine spark plugs on a Suzuki Swift third series. First we open the bonnet of our c

Other guides that may interest you

    Frequently Asked Questions

    • Swift 2017-2024 - What is the position of the spark plugs on the Suzuki Swift? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos