Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Sport 110 : How to replace the battery in the Sym Sport 110 scooter?

Model: Sym Sport 110
Part: Battery
How to replace the battery in the Sym Sport 110 scooter?

As we can see in this tutorial, replacing the battery in the Sym Bonus 110 scooter is an extremely simple and fast operation. First of all, let's make sure that the key is not inserted, so that we can work safely. Then, we open the seat, locate the screws that secure the lower cover, and unscrew them using a simple cross-tip screwdriver. Once this is done, we loosen the screws on both terminals, disconnect the negative first and then the positive. At this point, all that remains is to remove the old battery from its housing, insert the replacement, and reassemble everything.


Posted on 31 July 2023 by ScegliAuto



How to replace the battery in the Sym Sport 110 scooter?
Sport 110 As we can see in this tutorial, replacing the battery in the Sym Bonus 110 scooter is an extremely simple and fast operation. First of all, let's mak
How to replace the battery in the SYM E-Bonus 110 scooter?
E Bonus 110 In this tutorial we can see how to replace the battery in the SYM E-Bonus 110 scooter, an extremely simple and fast operation. First of all, make sur
How to replace the engine oil in the SYM Bonus 110 scooter?
Bonus 110 In this tutorial, we can see how to replace the engine oil in the SYM Bonus 110 scooter, an extremely simple and fast operation. First of all, we wai

How to change the light bulb on a Peugeot Kisbee

In this video we can see how to change the front light bulb of the Peugeot Kisbee scooter: first of all, we need to remove the front shield, unscrewing the six torx screws on the edges of the shield that will allow us to remove it easily. In the center we will find the cap where the bulb is inserted; we will have to unscrew the rubber cap slightly and remove it, after removing the electrical connector. Here we replace the bulb with one of those provided and then put the bulb holder back in place (always remember not to touch the bulb of the new bulb with bare hands). put the cap back in place, put the electrical connector back in place and also the six screws that hold the shield in place. Job done.

Watch the video!


by ScegliAuto

More videos