Do it yourself
| ||||
|
Toyota C Hr - Video tutorial
Model: Toyota C Hr
Ax50, Ax10, MK 1
- Years 2016-2023 Procedure for replacing the spark plugs of the Toyota CH-R Hybrid. Open the hood of the engine compartment, using a 10mm socket wrench disconnect the negative battery terminal, remove the electrical connectors of the coils located above the spark plugs. Using the same 10mm socket wrench, unscrew the bolt that secures the coils, number the coils with a white marker pen, so that they can be put back in the same sequence after disassembling them. Before removing them, clean the surrounding areas to prevent dirt from entering the cylinders. Once the coils are removed, using a 14mm socket wrench with an extension, unscrew and remove the old spark plugs, replace them with new ones, reinstall the coils in the correct sequence, tighten the bolt and reconnect the connectors. Reconnect the negative battery terminal.
Posted on 17 April 2024 by ScegliAuto
Toyota CHR license plate light bulb replacement
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) The replacement of the Toyota CHR license plate light bulbs is very simple: the relative lamp holders are located in the strip immediately above the
How to change the time on the Toyota Chr
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) To update the time on the car it is necessary to turn the key and turn on the ignition (it is not necessary to start the engine), the clock is presen
How can I change the remote control battery of my Toyota CHR?
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) When you need to replace the key battery of your Toyota C-HR this video will be very useful. First you have to press the button at the top, which wil Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |