Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
If you hear a loud rolling noise inside the cabin, you may have a problem with a wheel bearing or the wheel itself. Try running your hand over the wheel. If it feels "rough," then the problem is the wheel itself. If it is smooth and round, try swapping the front and rear tires. If the noise doesn't change, then you may have a problem with the bearing. You need to remove the wheel from the car to access the control arms, caliper, and rotor. You have to disconnect all of these components and only remove the axle nut to take off the rotor. Inside, you will find the bearing. By testing the disassembled parts, you can clearly hear the noise that the bearing makes inside the piece. During disassembly, we must be extremely careful not to damage the ABS sensor's teeth. Naturally, removing the bearing requires specific equipment and cannot be done alone. This video is only meant to show how the job is done.
Posted on 16 October 2023 by ScegliAuto
The color of our tires can give us indications about the resolution of some noise problems in the car.
(Various brands) Various This video provides us with interesting indications; in fact, it is possible to determine which defect causes a certain noise in our car by just look
How to change the wheel bearings.
(Various brands) Various In this video we see how to replace a wheel bearing. It is one of those parts that we immediately realize needs to be replaced due to the continuous
How to know if the starter motor has broken?
(Various brands) Various The starter motor is an electric motor that connects and spins the flywheel to initiate the movement of the pistons in order to create the compressio Other guides that may interest you
|
Frequently Asked QuestionsHow do I replace the Land Rover Evoque auxiliary battery?In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |